The 3 axles fuel tanker trailer is designed in accordance with ADR standard and manufactured with advanced processing technology. The chassis is specially used by various manufacturers, which has advanced technology and reliable performance. Suitable for Middle East (Saudi Arabia, Oman, Kuwait, etc.) and West Africa (Gabon, Ghana, Mali, Burkina Faso, etc.) markets.

The structural design of the compartment separates the oil in the compartment, which can reduce the impact and ensure safety, and can also transport different types of gasoline.

Roof adopted tech-oriented type non-slip aisle, both sides are equipped with folding fence, to ensure the safety of roof homework, on both sides of each jar is equipped with high strength protective bar, little attention can be found that the whole roof is deep groove type structure, double protection and protection bar tanks, when the tanker overturned occurs, the first time, In this way, the damage of tank mouth and tank body can be reduced to the greatest extent.

The fuel tanker trailer tools box is equipped with two sets of bottoms oil, a set of oil and gas recovery system, a static reel, in terminal loading, these are the essential device, without these configuration, oil depot, it is not allowed to pull oil pump in the pump out is the standard bike, on the semi-trailer tanker truck, tractor head and trailer is separate, Pumping in and pumping out can only be installed on the dangerous goods traction head, and the oil can be loaded down through the hose connection to achieve quick oil unloading.

⬛Specification

Tare Weight： 8,500 Kg

Dimension（L * W * H）：10,500 x 2,490 x 3,696 mm

TANKER BODY

Shape： Square

Medium： Petrochemical liquid

Chamber Nos： 6 chambers

Valid Volume： 30000L

Body Steel Material： Q345B / 5mm

End Plates： Q345B / 6mm, by punching

Resistant Wave Plates： Q345B / 5mm

Partition Chamber Plates： Q345B / 6mm

FITTINGS AND PIPING

Manhole： 4 sets YOJE aluminium alloy ø500mm(20”) manhole with aluminium alloy cover; with 4units breather valve; with 4units U-dipstick;

without any Chinese

Discharge Valve： 4 sets YOJE DN80 aluminum alloy discharge valve with cover

Foot Valve： 4 sets pneumatic control YOJE DN80 aluminum alloy foot valves

Pneumatic Control system： 1set Pneumatic Control combined switch

1unit emergency switch

Oil-water Separator： 1unit

Pipeline At Bottom of Tank： 3” steel tube/Q235 for each chamber

ACCESSORIES

Ladder： 1 unit at the rear of tank, flat steps, folding and detachable type

Walkway Platform： On the top of tanker; bolted, detachable type; with anti-slip painting and quartz sand

Guard on Top of Tank： 2 sets aide guard, one of them is linked type

Discharge Hose Box： 2 units, each side 1 unit, steel, cylinder tube with covers on both ends; with guide wheel

Discharge Hose： 2 units 3”×6M factory PVC hose with quick coupling on both ends

Fire Extinguisher Carrier： 2 units at the left of rear of tanker, include 2 units 10kg dry powder type fire extinguisher inside

Oil Indicator： 4 units

Tire Stopper： 2 units with its holder

CHASSIS

Main Beams： Heavy duty and extra durability designed; Opting for high tensile steel, welded by automatic Submerged-Arc processes.

Welded “I” beam;

Axle： 3 units of heavy duty original BPW-16T axle

Landing Gear： Two speed manual operation JOST 19” linked landing gear

King Pin： One unit 3.5” bolt-in kingpin(14mm kingpin plate)

Suspension： German design 3 axle suspension

Wheel Rim & Tires： 13 units 9.00*22.5 rims & 13 units 315/80R22.5 tires,

including 1 unit spare tire&rim

Electrical Wire： Semi heat insulation cable; One unit JAEGER POWAY 24V 7-pin ISO 1185 socket; One set 7-pin wire;

LED lights system(10units side lights; 2units stop lights; 1unit reverse lights; 2units turn lights; 1unit fog light; 1unit license plate light; 2units multifunctional lights; 1unit rear&high stop light)

Built-in rear lamp with protector.

Pneumatic Braking System： One unit WABCO RE 4 relay valve; four units T30/30 spring brake chamber; two units T30 spring brake chamber; two units reliable local brand 45L air tank; two units reliable local brand standard coppery air-connector.

Spare tire carrier： 1 unit, box-type for 2 tires

Bumper： 1set, at the end of tanker

Mudguard ： Plastic type

Nameplate： As client’s option

Warning Plate： Reflective sticker yellow, wide 5CM, on both side of the tanker;

Square reflective sticker 5CM, red color, at rear of tanker;

2units triangle reflective; 70km/h speed sign;

NO.3 flammable liquid danger warning sign

Fuel Box： 2units, 500L/unit, with lock

Tool Box： 1 unit tool box in the middle of tanker; bolted type, double nuts; with tire casing, handle and reinforcing bar in it

Accessories： With 1unit Pickaxe; 1unit Plastic Hammer; 2unit small Mop;

1unit First-aid kit; 3units conical roadblock; 1unit small shovel;

2units triangle warning board; 1unit 10L Aluminum barrel

Shell finish - exterior： Sand blasting before painting; two coats of primer, anti-corrosion; two coat of finish painting;